The Baby Deltic Project has issued its bufferbeam update, here it is:

The multi-working receptacle on the donor loco was mounted in an ever-so-slightly different place compared to a Baby Deltic. As part of the constant strive for attention to detail we elected to move it towards the loco centre-line where it should be. It'll be a dummy when it's re-sited, no multiple working will be fitted to the loco. To this end the minor mis-alignment of the hole through the bufferbeam will not be a problem, in fact we'll probably weld it up.

Seen in the images below are the stages involved.

Please cut and paste this article into your own 'news' website, changing perhaps one or two words to make it look as if you've written it.